A
-
Abbasi, seyed mahdi
The effect of ageing on the microstructure and hardness of Al10Co25Cr8Fe15Ni36Ti6 high entropy alloys [Volume 34, Issue 3, 2023, Pages 1-14]
-
Ahmadi, H
Description of flow behavior and changes in grain size and structure of API-5CT-L80 steel in hot deformation process [Volume 34, Issue 4, 2023, Pages 71-82]
-
Akhtari, Faezeh
Oxidation behavior of GTD-111 nickel base superalloy at 1000 °C [Volume 34, Issue 1, 2023, Pages 59-68]
-
Alavi Nezhad Khalil Abad, Seyed Vahid
The effect of silicon on the formation of titanium aluminide intermetallic compounds from Al and TiO2 [Volume 34, Issue 1, 2023, Pages 47-58]
-
Albooyeh, Alireza
Optimization of Mechanical and Morphological Properties of Polypropylene Reinforced with Natural Rubber-Perlite Nanoparticles Using Response Surface Method [Volume 34, Issue 2, 2023, Pages 1-18]
-
Aliadeh, Ali
Investigation on Microstructure and Mechanical Behavior of Carbon and Glass Reinforced Aluminum CompositePipes [Volume 34, Issue 1, 2023, Pages 31-46]
-
Aliadeh, Ali
Synthesis and characterization of electroless Ni-P-ZrO2-TiO2 coating on Steel substrate [Volume 34, Issue 2, 2023, Pages 67-86]
-
Alipour, Mohammad
Investigation of the microstructure and mechanical properties of cast Al-8Zn-3Mg-2.5Cu nanocomposite reinforced with SiC nanoparticles after age hardening heat treatment [Volume 34, Issue 1, 2023, Pages 1-14]
-
Alipour, Mohammad
Investigating the microstructure and strength properties of 500 series aluminum casting alloy modified with rare earth element erbium [Volume 34, Issue 2, 2023, Pages 87-96]
-
Alipour, Mohammad
Investigating the Microstructure and Mechanical Properties of Cu-5Zn Alloy Nanocomposite Reinforced with Carbon Nanotubes [Volume 34, Issue 3, 2023, Pages 17-28]
-
Alipour, Mohammad
Investigating the wear behavior of nanocomposite based on Cu-5Zn alloy reinforced with carbon nanotubes [Volume 34, Issue 4, 2023, Pages 1-16]
B
-
Barati Darband, Ghasem
The Effect of Process Parameters on the Phase and Microstructure of Cu-Mn-O Mixed Metal Oxide Synthesized via Solution Combustion Synthesis [Volume 34, Issue 4, 2023, Pages 31-44]
D
-
Dejam, Laya
Effect of Thickness on Structural, Optical and Electrical Properties of Co-Doped ZnO Thin Films (ZnO: Cu, Al) [Volume 34, Issue 2, 2023, Pages 19-32]
E
-
Ebrahimi, GH
Description of flow behavior and changes in grain size and structure of API-5CT-L80 steel in hot deformation process [Volume 34, Issue 4, 2023, Pages 71-82]
-
Ebrahimi, Gholamreza
Hot deformation characteristic and microstructural evolution of a near alpha alloy Ti-8Al-1Mo-1V [Volume 34, Issue 2, 2023, Pages 35-50]
-
Ezatpour, hamid reza
Hot deformation characteristic and microstructural evolution of a near alpha alloy Ti-8Al-1Mo-1V [Volume 34, Issue 2, 2023, Pages 35-50]
F
-
Fereidoon, Abdolhosein
Optimization of Mechanical and Morphological Properties of Polypropylene Reinforced with Natural Rubber-Perlite Nanoparticles Using Response Surface Method [Volume 34, Issue 2, 2023, Pages 1-18]
H
-
Hejazi, Seyedsina
Oxidation behavior of GTD-111 nickel base superalloy at 1000 °C [Volume 34, Issue 1, 2023, Pages 59-68]
-
Helali, Vesal
Synthesis of CuO nanoparticles via solution combustion and assessment of its antibacterial properties against gram-positive and -negative bacterial strains [Volume 34, Issue 1, 2023, Pages 69-80]
-
Hosseinian Naeini, Ali
Removal of Organic Pollutants from Colored Wastewater Using Nanocomposite Adsorbents: A Review [Volume 34, Issue 3, 2023, Pages 43-76]
J
-
Johari, Narges
Development of Polycaprolactone/zinc Oxide Nanoparticles/Chitosan Scaffolds for Skin Tissue Engineering and Improving its Mechanical Properties [Volume 34, Issue 3, 2023, Pages 29-42]
K
-
Kalaee, Mohammad Reza
Removal of Organic Pollutants from Colored Wastewater Using Nanocomposite Adsorbents: A Review [Volume 34, Issue 3, 2023, Pages 43-76]
-
Kasaeian, Fatemezahra
Development of Polycaprolactone/zinc Oxide Nanoparticles/Chitosan Scaffolds for Skin Tissue Engineering and Improving its Mechanical Properties [Volume 34, Issue 3, 2023, Pages 29-42]
-
Kharaji, Arezoo
3D Modeling of Fatigue Effect in Ionic Metal Polymer Composites [Volume 34, Issue 3, 2023, Pages 77-94]
-
Khoshhal, Razieh
The effect of silicon on the formation of titanium aluminide intermetallic compounds from Al and TiO2 [Volume 34, Issue 1, 2023, Pages 47-58]
M
-
Mahmoodi, Niyaz Mohammad
Removal of Organic Pollutants from Colored Wastewater Using Nanocomposite Adsorbents: A Review [Volume 34, Issue 3, 2023, Pages 43-76]
-
Mirjalili, Mostafa
Synthesis of CuO nanoparticles via solution combustion and assessment of its antibacterial properties against gram-positive and -negative bacterial strains [Volume 34, Issue 1, 2023, Pages 69-80]
-
Mirjani, Masoud
Investigating the Ability of Coating the SiC by APS and HVOF Processes through the Nickel-Phosphorus Cladding on the Primary Powder [Volume 34, Issue 4, 2023, Pages 17-30]
-
Moghaddam Matin, Maryam
Synthesis of CuO nanoparticles via solution combustion and assessment of its antibacterial properties against gram-positive and -negative bacterial strains [Volume 34, Issue 1, 2023, Pages 69-80]
-
Mollaei, Mohammad Hasan
Synthesis of CuO nanoparticles via solution combustion and assessment of its antibacterial properties against gram-positive and -negative bacterial strains [Volume 34, Issue 1, 2023, Pages 69-80]
-
Momeni, Amir
Hot deformation characteristic and microstructural evolution of a near alpha alloy Ti-8Al-1Mo-1V [Volume 34, Issue 2, 2023, Pages 35-50]
N
-
Naghavi, Nadia
3D Modeling of Fatigue Effect in Ionic Metal Polymer Composites [Volume 34, Issue 3, 2023, Pages 77-94]
-
Nakhaee, Mohammadreza
Optimization of Mechanical and Morphological Properties of Polypropylene Reinforced with Natural Rubber-Perlite Nanoparticles Using Response Surface Method [Volume 34, Issue 2, 2023, Pages 1-18]
P
-
Pahlavanshamesi, mohmmadreza
Thermal and phase analysis of aluminothermic self-propagation process in Al-Fe2O3-Cr2O3-NiO system [Volume 34, Issue 1, 2023, Pages 15-30]
-
Pour-Ali, Sadegh
Oxidation behavior of GTD-111 nickel base superalloy at 1000 °C [Volume 34, Issue 1, 2023, Pages 59-68]
R
-
Ramezani, Amir Hoshang
Effect of Thickness on Structural, Optical and Electrical Properties of Co-Doped ZnO Thin Films (ZnO: Cu, Al) [Volume 34, Issue 2, 2023, Pages 19-32]
-
Rezaei Ashtiani, Hamidreza
Description of flow behavior and changes in grain size and structure of API-5CT-L80 steel in hot deformation process [Volume 34, Issue 4, 2023, Pages 71-82]
S
-
Sajjadi, Seyed Abdolkarim
Synthesis of CuO nanoparticles via solution combustion and assessment of its antibacterial properties against gram-positive and -negative bacterial strains [Volume 34, Issue 1, 2023, Pages 69-80]
-
Sajjadi, Seyed Abdolkarim
Effect of Presence LDPE on Mechanical and Electrical Properties of CB/HDPE Segregated Structure [Volume 34, Issue 4, 2023, Pages 59-70]
-
Seifollahi, Masumeh
The effect of ageing on the microstructure and hardness of Al10Co25Cr8Fe15Ni36Ti6 high entropy alloys [Volume 34, Issue 3, 2023, Pages 1-14]
-
Sharifitabar, Mahmood
Investigation of microstructure and mechanical properties of aluminum alloy parts manufactured by Balouch Aluminum Co [Volume 34, Issue 2, 2023, Pages 51-66]
-
Shariyari, Raziyeh
Investigation of microstructure and mechanical properties of aluminum alloy parts manufactured by Balouch Aluminum Co [Volume 34, Issue 2, 2023, Pages 51-66]
-
Soleymani, Farzad
Surface improvement of AZ31 magnesium alloy for engineering applications [Volume 34, Issue 4, 2023, Pages 45-58]
-
Soleymani, Hadi
Optimization of Mechanical and Morphological Properties of Polypropylene Reinforced with Natural Rubber-Perlite Nanoparticles Using Response Surface Method [Volume 34, Issue 2, 2023, Pages 1-18]
-
Soltani, Saeed
Thermal and phase analysis of aluminothermic self-propagation process in Al-Fe2O3-Cr2O3-NiO system [Volume 34, Issue 1, 2023, Pages 15-30]
V
-
Valefi, Zia
Investigating the Ability of Coating the SiC by APS and HVOF Processes through the Nickel-Phosphorus Cladding on the Primary Powder [Volume 34, Issue 4, 2023, Pages 17-30]
Z
-
Zamani Moghadam, Pejman
Investigating the Ability of Coating the SiC by APS and HVOF Processes through the Nickel-Phosphorus Cladding on the Primary Powder [Volume 34, Issue 4, 2023, Pages 17-30]
-
Zamyad, Hojat
3D Modeling of Fatigue Effect in Ionic Metal Polymer Composites [Volume 34, Issue 3, 2023, Pages 77-94]
-
Zarghani, fateme
Hot deformation characteristic and microstructural evolution of a near alpha alloy Ti-8Al-1Mo-1V [Volume 34, Issue 2, 2023, Pages 35-50]
Your query does not match with any item